WARNING To prevent serious injury or death: • Fall Hazard - It is dangerous to use this product on an elevated surface, since child's movement may cause the product to slide or tip over. Use only on a fl oor. •...
Page 3
IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price for replacement parts and instructions if needed. Never substitute parts.
Page 4
• Insert screw into each foot and tighten. Footrest Base Wires • Position the footrest so that the soothing unit is upright. • Fit the footrest onto the ends of the base wires. Assembly Seat Back Tube • Fit the seat back tube onto the ends of the base wire. •...
Page 5
• Position the pad above the frame. • Fit the upper pocket on the back of the pad onto the seat back tube. Pad Lower Pocket • Lift the footrest. Fit the lower pocket on the back of the pad onto the footrest.
Hint: We recommend using an alkaline battery for longer battery life. 1,5V – “D” (LR20) 1,5V x 2 “AA” (LR6) • Pull to remove the pad from around the retainers and the soothing unit • Remove the pad bottom pocket from the footrest •...
WARNING To prevent serious injury or death: • Fall Hazard - It is dangerous to use this product on an elevated surface, since child's movement may cause the product to slide or tip over. Use only on a fl oor. •...