IMPORTANT! Before assembly and each use, inspect this product for
damaged hardware, loose joints, missing parts or sharp edges. DO
NOT use if any parts are missing or broken. Contact Fisher-Price
replacement parts and instructions if needed. Never substitute parts.
Front Tube
Rear Tubes
1
Frame
• Lift the rear and front tubes to open the frame.
Foot
Foot
2
• Fit a foot onto the end of each base tube, as shown.
Hint: Make sure the feet curve outward.
Front
Tube
Base Tube
TOP VIEW
Assembly
for
®
3
• Insert an M4.5 x 12 mm screw into the hole in the underside of
each foot and tighten with a Phillips screwdriver.
Base Tube
4
• Position the upper frame tubes so that the hubs face each other.
• Fit the upper frame tubes into the rear frame tubes.
Hint: The upper frame tubes are designed to fit one way. If they do
not seem to fit, turn them around and try again.
5
BOTTOM
VIEW
2 - M4.5 x 12 mm
Screws
Upper Frame Tube Hubs
Rear Frame Tubes