Graco MyRide Installation Manual

To Remove Existing Harness Tongues and Buckle and Attach Replacement Buckle
1
To loosen straps, lift lever
and pull harness straps.
4
Remove chest clip.
DO NOT DISCARD the
chest clip.
7
Slide NEW buckle onto
harness straps. MAKE
sure not to twist straps.
10
Insert harness straps
behind harness cover
plate.
MyRide ® Buckle Replacement Guide
2
5
Unbuckle harness by
down, press top of red
tongues out of buckle.
8
Re-attach chest clip.
MAKE sure not to
twist straps.
11
Re-insert straps back onto splitter plate.
See carseat owner's manual for inserting the
splitter plate into the correct set of loops for
your child.
Remove harness
strap loops from
splitter plate.
tilting top of buckle
button, and pull
9
Re-insert straps through slots
in seat pad and seat back.
See carseat owner's manual for inserting
the straps into the correct set of harness
©2013 Graco PD245610A 5/13
3
Pull harness straps
through seat back and
seat pad.
6
Remove and discard
tongues.
slots for your child.
Turn page over to
the assembly
Steps 12 to 20
for the buckle
replacement.