Carrier 42NQV025H Service Manual page 107

No. Part name
‡
Compressor 1) Perform work of item 1 of
2) Extract refrigerant gas.
3) Remove the partition board.
4) Remove the sound-insulation material.
5) Remove terminal cover of the compressor,
6) Remove pipe connected to the compressor
7) Remove the fixing screw of the bottom plate
8) Remove the fixing screw of the bottom plate
9) Pull upward the refrigeration cycle.
10) Remove BOLT (3 pcs.) fixing the compres-
ˆ
Reactor 1) Perform work of item 1 of
2) Remove screws fixing the reactors.
Procedure
…
.
(ST1TØ4 × 10L 3 pcs.)
and disconnect lead wire of the compressor
from the terminal.
with a burner.
• Take care to keep the 4-way valve away
from naked flames. (Otherwise, it may
malfunction.)
and heat exchanger. (ST1TØ4 × 10L 1 pc.)
and valve fixing plate.
(ST1TØ4 × 10L 1 pc.)
sor to the bottom plate.
* Precautions when assembling the com-
pressor.
Tighten the compressor bolts using a
tightening torque of 4.9 N•m.
(ST1TØ4 × 10L 4 pcs.)
 ‚ ƒ „
and , , ,
‚ ƒ
, and .
– 107 –
FILE NO. SVM-07013
Remarks
Partition
board
Compressor
Valve
fixing
plate
Reactor