Lenovo Edge 14 Hardware Maintenance Manual page 95

Table 31. Removal steps of DC-in cable and base cover (continued)
Cable routing: Route the cable as shown in these figures.
For ThinkPad Edge 15" and E50:
For ThinkPad Edge 14" and E40:
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds.
If the Windows Authentication label (COA)
label attached to the customer, or provide a letter to the customer stating what the label was originally on the
system and what the label part number, serial number, and product key were.
When you replace the base cover, apply the following labels:
4
Battery word label
6 Homologation label
The following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
3 is attached to a part that is replaced, return the old part with the
.
Chapter 8 Removing and replacing a FRU
89