Setting The Auto Power-Off Time; Resetting The File Numbers - Minolta Dimage G500 Instruction Manual

Using the Set-up Menu

Setting the Auto Power-OFF Time

- You can change the Auto Power-OFF not-in-use interval starting at 3 minutes
(default).
1

Resetting the File Numbers

- You can reset your file numbers.
1
Reference:
• At initial setting, "NUMBER RESET" is turned "OFF", and it will assign
consecutive file numbers as follows.
XXXXX1.jpg, XXXXX2.jpg, XXXXX3.jpg...
• If there are no images shot on the card when "NUMBER RESET" is turned
"ON", it will attach numbers starting with XXXXX1.jpg. If pictures exist, the
number following already existing file numbers will be given.
104
(Cont'd)
1. Select "AUTO POWER OFF", press
the settings screen appears.
Use or to select "10 min" or "OFF" and
then press either
button. The setting is completed and you
return to the Set-up menu.
• If you press
return to the Set-up menu.
1. Select "NUMBER RESET", press
settings screen appears.
Using or
or the MENU/SET button. The setting is
completed.
• If you press
return to the Set-up menu.
or the MENU/SET
, the setting is invalidated and you
, select "ON" and press either
, the setting is invalidated and you
and
and the