Minolta Dimage G500 Instruction Manual page 108

Using the Set-up Menu
Setting the AE-Lock to "ON"
If you press
half-way on page 34), the exposure setting locks and the AE lock icon
appears on the LCD monitor. The setting becomes effective even after
you take a shot.
* To cancel the AE-lock, turn the camera's power OFF, press the Zoom, MENU/
SET, or PLAY button, or change the white balance setting.
4) You can also set the sequence shooting to on or off. If you set it to on, this
feature lets you take a sequence shot by holding down the shutter button.
* If you are taking photos with the flash, make sure that the flash is fully charged
before taking next photo.
1
2
108
while activating focus lock (pressing the shutter button
1. Select "CUSTOM" and press
settings screen appears. Select the desired
setting with
the MENU/SET button.
2. In screen 1, select "FLASH" and press
The flash mode settings screen appears.
Select the desired mode with
press either
change the setting. When the setting is
completed, press
(Cont'd)
or , and press either
or the MENU/SET button to
or
to return to screen 1.
. The
or
.
, and