Modifiers; Option Buttons - Bosch WFMC3301UC Operating, Care And Installation Instructions Manual

Selecting bleach" option will ensure
bleach dispensation at the right time.
The dynamic load sensor will add
enough water to dilute the bleach,
preventing bleach marks on the
clothes.
Heavy duty" option will extend the
wash phase to a longer period of time
to achieve optimum wash performance
(see detailed explanation of heavy soil).
Spin
Spin cycle for spinning wet, hand
washed laundry.
Water is drained before and during the
spin cycle.
Soak
A cycle for pre treatment of heavily
stained items. The soak cycle lasts 2
hours and ends with a short spin cycle.
Drain
Can be used to drain water without a
spin cycle.
Temperature Settings
The following wash temperatures are
available:
170°F (77 °C)
XXTRA SANITARY:
150 °F (66°C)
Temp. boost:
(only Regular/Cotton)
125 °F (52 °C)
hot:
95 °F (35 °C)
warm:
60 °F (15 °C)
cold:
Maximum spin speeds of the
programs
The indicator light max spin speed" is lit red.
Revolutions Program
per minute
1100 Regular/Cotton
800 Permanent Press
600 Delicates
800 Wool
1100 XXTRA SANITARY
1000 Quick Wash 25
1100 Spin
Reduced spin
The indicator light reduced spin" is lit
red only if you have selected a reduced
spin speed for gentle treatment of your
laundry.
Gentle spin speeds
The indicator light Gentle spin speed" is lit
red.
Revolutions Program
per minute
400 Hand Wash
400 Soak
18
No final spin
The indicator light no final spin" is lit
red.
For delicate laundry, the water remains
in the machine after the last rinse.
Use this setting to avoid creasing if the
clothing cannot be taken out of the
washing machine immediately upon
completion of the cycle.
ATTENTION
Before unloading you must drain the
remaining water by selecting Drain
or Spin and starting the machine.

Modifiers

Spin Selection
Preset cycle setting of max. spin speed
can be changed.
Press this button until the desired
setting lights up.
Delay Start
Before starting a program you can
modify by when the cycle should be
started.
Press Delay Start button. The display
shows the start time
0:00.
The time can be delayed up to a
maximum of 19 hours (with 1 hour
increments) by pressing the Delay
Start button repeatedly.
The Start time begins running
immediately after pushing the
Start/Pause button. This is indicated
by the points between the digits
flashing.
i Changes to the Start time are
possible at any time, press the
Delay Start button until the new
time appears.
i
If the program is changed or if the
program is interrupted, the
preselected Start time is also
interrupted. The Ready in time of
the program is displayed. The
Start time must be reselected.

Option buttons

Bleach
When this button is pressed, a bleach
cycle will be added to the selected
cycle.
The washing cycle time is extended
accordingly.
The Bleach option is not available
q
if the Delicate, Hand wash or Wool
cycle is selected.
Rinse Plus
When this button is pressed, an
additional rinsing cycle will be added to
the selected cycle.
Washing cycle time is extended
accordingly.
Heavy duty
The Heavy duty option is
recommended for use ONLY for
heavily soiled clothes that require
the removal of tough, ground-in
protien-based stains. It is NOT
recommended to use the Heavy duty