Transmitter Programming; Option Programming - CrimeStopper CS-865RKE Installation & Operating Instructions Manual

Remote keyless entry system
Table of Contents

Advertisement

1. Turn Ignition ON and OFF 3 times quickly, leaving it ON the 3
2. Lights should flash 3 times & horn will chirp 3 times if horn feature is installed.
3. Push and hold the Program/Override Button for about 5 seconds until you get 3 lights/LED flashes & 3
Horn chirps. Release the button.
4. Press the #1 (LOCK) on transmitter to learn. Lights will flash for code learn confirmation.
5. Repeat step 3 for up to 2 additional transmitters. The system will learn a total of 3 transmitter codes.
6. Turn off Ignition. System will flash lights 3 times and chirp 3 times when exiting programming mode.
To change programmable options, follow steps below. LED Must be installed or plugged into control module
for programming options.
1. Turn the Ignition ON, wait one second, and press the Override/Program button 5 times.
2. The system will flash the LED 5 times
3. Within the next few seconds, press the Override/Program button [again] the number of times that
corresponds to the options chart below. Parking lights and/or optional horn should chirp for each button
press. Don't lose count!
4. When you get to the desired option number, quickly press the appropriate button on the remote control
according to the chart below. The system will provide 1 chirp/flash for Button 1 (Lock Symbol) and 2
chirps/flashes for button 2. (See Option Chart for numbers, descriptions, and values.)
5. Turn Ignition off. Change ONE option at a time repeating these same steps 1-4. When you are finished
customizing options, check operation to see if the option(s) have changed.
PROGRAMMING OPTIONS CHART
Option #
Option Description
1.
Auto Lock & Unlock with Ignition ON or OFF
2.
Double Unlock Pulse
3.
Horn Chirp
4.
Lock/Unlock Pulse Time
5.
Passive Starter Disable
6.
Ignition Trigger
7.
Extended Horn Chirp
CS-865RKE TRANSMITTER PROGRAMMING

OPTION PROGRAMMING

rd
time. (ON/OFF, ON/OFF, ON)
* = DEFAULT SETTING
Selection
Lock Button
ON or OFF
ON or OFF
0.8 Sec. or 3 Sec.
ON or OFF
ON or OFF
Normal or Extended
Unlock
Button
ON*
OFF
OFF*
ON
ON*
OFF
0.8 Sec.*
3 Sec.
OFF*
ON
OFF*
ON
Normal*
Extended

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents