Toshiba 23L1400UC User Manual page 22

22
Introduction
TV back panel connections
40"
5
50"
5
(Sample Illustration) 40/50L1400UC - Back panel connections
1 ANT/CABLE—Antenna input that supports analog (NTSC)
and digital (ATSC) off-air antenna signals and analog and
digital cable TV (QAM) signals.
2 ColorStream
and shared composite video input, see
/ DVD player, satellite receiver with ColorStream
rayTM / DVD player, satellite receiver with ColorStreamTM or
VCR" on page 28
3 HDMI
receives digital audio and uncompressed digital video from an
HDMI
device. HDMI
signals.
4 Digital Audio out— Optical audio output in Dolby
PCM (pulse-code modulation) format for connecting an
external Dolby
system with optical audio input.
5 Power Cord— Plug one end of the power cord into the jack on
the back of the unit, and the other end into a live electrical
outlet. (Only for 40/50L1400UC models.)
Power cord
Power cord
HD—High-resolution component video input
TM
IN—High-Definition Multimedia Interface input
®
device or uncompressed digital video from a DVI
®
connection is necessary to receive 1080p
®
Digital decoder, amplifier, or home theater
®
The included power cord is for use with this unit only. Do not use it with other
equipment.
If you are not going to use the unit for an extended period of time, disconnect
the power cord from the wall outlet. Whenever the power cord is plugged into
the wall outlet, it will draw some power, even when the unit is off.
1 2 3
4
"Connecting a Blu-
Blu-ray
TM
or VCR"
TM
Digital or
®