Samsung HW-C450 User Manual page 23

Using the Bracket-Wall Mount
When the main unit is connected to a TV with optical cable(Digital input), it is
automatically turned on when you turn on the power of your TV.
OPTICAL
OUT
METHOD 2 : DIGITALIN
'+-~=t------II_II
(OPTICAL)
DIGITALIN
TV
AUDIO
OUT
L R
METHOD 1 : AUDIO IN
()= •
If the HW-C450 is connected to external devices besides a
TV,
abnormal
sound may occur due to excessive sound input. If this occurs, please use
after reducing the volume.
• See page 12 of the user manual to connect the Wireless Subwoofer.
2
If the strength of the wall is insufficient
for the product installation, make sure to
reinforce the wall before the installation.
~
Fit the unit into the corresponding
~
slots of the wall mount bracket.
For secure installation, make sure
the mounting studs slide down
to the right into the bottom of the
slots.
cr
If you do not install this unit firmly, it may
fall down and cause injury.
~
Place the wall mount bracket on a wall
~ surface and then secure it with appropriate
screws (not supplied).
Using the AUTO POWER LINK function
The Crystal Surround Air Track is automatically turned on when you turn the
power on of a TV or any device connected to Air Track with the optical cable.
~
This is the completion of the
~
suggested wall mount installation.
*
2 inches (5 cm) or more
VOUCONTROL MUTE 1V CH
A
Press AUTO POWER on the remote control of this unit.
• Auto power link function turns on and off each
time you press AUTO POWER.
AUTO POWER LINK Display
ON POWER LINK ON
OFF POWER LINK OFF
()= •
If a TV or any device connected to Air Track with the optical cable is off
and there is no digital input, the Air Track is turned off after 20 minutes.