Sony NXCAM HXR-NX30E Operating Manual page 63

Setup
Playback Settings
Data Code
Connection
Disp Output
TV Type
HDMI Resolution
HDMI TC Output
USB Connect
General Settings
Beep
LCD Brightness
Display Setting
GPS Information
GPS Setting
REC Lamp
Remote Ctrl
Language Setting
Calibration
Battery Info
Clock Settings
Date & Time Setting
Area Setting
Auto Clock ADJ
Auto Area ADJ
Sets how to assign the file number.
Selects where to output the display information,
such as time code.
Converts the signal depending on the TV
connected.
Selects the output image resolution when
connecting your camcorder to a TV with the
HDMI cable (supplied).
Transfers time code, user bit data to the device
connected with the HDMI cable (supplied).
Selects which type of media on the camcorder is
to be used when the camcorder is connected to an
external device via USB.
Sets whether the camcorder sounds operation
beeps or not.
Adjusts the brightness of the LCD screen.
Sets the duration that icons or indicators are
displayed on the LCD screen.
Displays location information.
Sets the GPS.
Sets the recording lamp to light up or not.
Sets whether the Wireless Remote Commander is
to be used or not.
Sets the display language.
Adjusts the touch panel.
Displays the battery information.
Sets the [Date & Time Format], [Summer Time],
or [Date & Time].
Adjusts for a time difference without stopping the
clock.
Maintains accurate time automatically.
Compensates for time differences automatically
by acquiring location information from the GPS
system.
82
83
83
83
84
84
84
84
84
84
85
85
85
85
110
85
85
86
86
86
GB