Sony NXCAM HXR-NX30E Operating Manual page 21

To adjust the angle of the LCD panel
First open the LCD panel 90 degrees to the
camcorder (), and then adjust the angle
().
Changing the display on the LCD screen
Press the DISP (DISPLAY) button to cycle the
screen display in the following order.
Recording: Detailed display  simple
display  nondisplay
Playing: Detailed display  simple display
In the default setting, the screen display changes to the simple display after about 3 seconds ([Display

Setting], p. 84). The display changes to the detailed display when you touch anywhere on the screen
except the buttons on the LCD screen so that you can use items.
To turn on the beep sound
 [Setup]  [
Select
Notes
The recording date, time and condition, and coordinates are recorded automatically on the recording

media. They are not displayed during recording. However, you can check them as [Data Code] during
playback. To display them, select
desired item.
 90 degrees (max.)
 180 degrees (max.)
about 3sec
after
General Settings]  [
 [Setup]  [
 90 degrees to the camcorder
]  [On].
Beep
Playback Settings]  [Data Code]  the
GB
1