Diseqc 4 Input Switch; Mini Diseqc Switch - Nokia Mediamaster 310 S User Manual

First time installation
Predefined channel
Select one of the predefined channels and adjust the antenna
until you have a TV picture from the predefined channel visible
in the background.
Perform the same procedure for the second DiSEqC port.
But this time select Switch port 2 and Astra as the satellite.
Press opt if you want to preview the channel.
• When the configuration of both Switch ports are ready, press
ok to continue to the channel search procedure. See page 20.

DiSEqC 4 Input Switch

Select this alternative if your antenna system has four LNB:s .
The selection of the different LNBs must be controlled by an
external switch. Refer to page 17.
The procedure is the same as for two LNBs, but you have to
configure four LNBs.
Connection of a four port DiSEqC switch:
The following is an example of how you can connect 4 LNBs if
you want to watch channels from Astra, Hotbird, Sirius and Thor.
Connect the LNBs to the switch the following way:
• the LNB intended for Thor to input 1
• Sirius to input 2
• Hotbird to input 3
• Astra to input 4
The output marked OUT on the switch shall be connected to the
ANTENNA input on the Mediamaster.

Mini DiSEqC Switch

Select this alternative if your antenna system has two LNB:s and
a Mini DiSEqC Switch (Tone burst).
The procedure is the same as for a two port DiSEqC.
GB 18
☛
☛
☛
DiSEqC switch with 4 inputs
☛