Table of Contents
Advertisement
Installation of the Mediamaster
Nokia smart switch
• Connect a coaxial cable between output A on the smart switch
(accessory) to the LNB socket on the analogue receiver.
• Connect a coaxial cable between output B on the smart switch
to the ANTENNA socket on the Mediamaster.
The analogue receiver must be switched OFF (in standby)
when you want to watch digital satellite channels from the
Mediamaster.
Connecting a HiFi system
• Connect an RCA stereo cable from the AUDIO L R sockets
on the Mediamaster to the LINE, AUX, SPARE or EXTRA in-
put sockets on your HiFi system.
• If available you can connect an RCA single cable from the DIG-
ITAL AUDIO socket on the Mediamaster to a HiFi system
equipped with digital audio input. This output is also used for
connection to an external Dolby
Note: To avoid interference you must use a screened audio
cable. Never connect digital output to any analog input.
Connecting to the built in phone modem
The built in phone modem makes it possible for you to use inter-
active services. Refer to page 35.
• Connect a telephone cable between the socket marked
Telephone on the rear of the Mediamaster and your ordinary
telephone socket in the wall.
GB 14
TM
digital decoder.
Nokia smart switch
HiFi system
Advertisement
Table of Contents
