Display Parameters; Modifying The Display Parameters; Changing The Wallpaper - Parrot MKi9200 User Manual

Display parameters

Modifying the display parameters

Adjusting the
brightness
Changing the display
color

Changing the wallpaper

You can change the wallpaper of the Parrot MKi9200 by selecting one of the wallpapers proposed by
default. You can also customize it by sending a photo directly to the kit.
Selecting a wallpaper
proposed by default
Customizing the
wallpaper
You can adapt the screen brightness of the Parrot MKi9200. To do so :
1. Press the jog wheel and select
2. Select Night mode
Note : You can also adjust the brightness parameter by holding down
the jog wheel for 2 seconds.
1. Press the jog wheel and select
2. Select the color using the jog wheel.
3. Press the jog wheel to confirm.
1. Press the jog wheel and select
use the jog wheel to choose the wallpaper you want to display.
2. Press the jog wheel to validate.
If you want to customize the Parrot MKi9200 wallpaper, you have to send
a picture via Bluetooth. To do so :
1. Make sure the Parrot MKi9200 is set so that it is visible by all
Bluetooth devices. To do so, press the jog wheel and select
> Bluetooth > Visibility.
> « Waiting for a picture » is displayed on the Parrot MKi9200.
2. Press the jog wheel then select
Customize > Add.
> « Waiting for a picture » is displayed on the Parrot MKi9200.
3. From your Bluetooth peripheral, send via Bluetooth the image you
want to display on the Parrot MKi9200. Refer to your device
documentation for more information about sending photos via
Bluetooth.
Settings > Display >
or Day mode.
Settings > Display >
Settings > Display > Wallpaper
Settings > Display > Wallpaper >
Brightness.
Theme.
then
Settings
17