Modifying The Display Settings; Selecting A Wallpaper Proposed By Default; Customizing The Wallpaper - Parrot MKi9200 User Manual

Modifying the display
settings
Adjusting
the
brightness
Changing the
wallpaper
You can adapt the screen brightness of the Parrot
MKi9200. To do so, press the jog wheel and select
Settings > Brightness
Mode.
You can change the wallpaper of the Parrot MKi9200 by
selecting one of the wallpapers proposed by default.
You can also customize it by sending a photo directly
to the kit.

Selecting a wallpaper proposed by default

1. Press the jog wheel and select
> Wallpaper
the list wallpaper you want to display.
2. Press the jog wheel to validate.

Customizing the wallpaper

1. Make sure the Parrot MKi9200 is set so that it is
visible by allBluetooth devices. To do so, press the
jog wheel and select
Visibility. Then, make sure this option is selected.
If it is not the case, select it by pressing the jog
wheel.
2. Press the jog wheel then select
> Wallpaper > Customize > Add.
> « Waiting for a picture » is displayed on the
Parrot MKi9200.
3. From your Bluetooth peripheral, send via Bluetooth
the image you want to display on the Parrot MKi9200.
► Refer to your device documentation for more
information about sending photos via Bluetooth.
To delete an image sent as wallpaper on your
Parrot MKi9200, press the jog wheel then select
Settings > Display > Wallpaper > Customize >
Delete.
then select
then use the jog wheel to choose in
Settings > Bluetooth >
Parrot MKi9200 – User guide
Night Mode or
Settings > Display
Settings > Display
Day
20