TROUBLESHOOTING
SYMPTOM:
No power at Video Monitor
Power but no video or sound
REMEDY:
Verify +12 VDC on the Red wire at 2 Pin Power Harness behind the
video monitor� Verify a ground connection with a continuity test
from a known good ground to the black wire at the 2 Pin Power
Harness�
Verify that the correct source is selected (i�e�: 1, 2, 3 or 4)� Verify
that the source is on and playing a known good media (such as
a videotape)� Verify the connections at both ends of the source
component harness�
16