5500-24G-Sfp Ei (2 Slots)/5500-24G-Sfp Ei Taa (2 Slots) - HP 5500 EI Series Installation Manual

5500-24G-SFP EI (2 slots)/5500-24G-SFP EI TAA (2 slots)

Figure 41 Front panel
(1) SFP port
(3) 10/100/1000Base-T auto-sensing Ethernet
port
(5) Console port
(7) Interface card 1 status LED (MOD1)
(9) System status LED (SYS)
(11) Power supply 2 status LED (PWR2)
(13) Seven-segment LED (Unit)
Figure 42 Rear panel
(1) Grounding screw
(3) Power supply slot 2
(5) Interface card slot 2 (MOD2)
NOTE:
The 5500-24G-SFP EI (2 slots) and 5500-24G-SFP EI TAA (2 slots) switches come with the expansion
•
interface card slots covered by filler panels.
• The 5500-24G-SFP EI (2 slots) and 5500-24G-SFP EI TAA (2 slots) switches come with one power
supply filler panel. If you use only one power supply, install the filler panel over the empty power supply
slot to prevent dust and ensure normal ventilation of the chassis. In this figure, a PSR150-A is installed in
power supply slot 1 and a PSR150-D is installed in power supply slot 2.
(2) SFP port LED
(4) 10/100/1000Base-T Ethernet port LED
(6) Port LED mode switching button
(8) Interface card 2 status LED (MOD2)
(10) Power supply 1 status LED (PWR1)
(12) Port mode LED (Mode)
(2) Power supply slot 1
(4) Interface card slot 1 (MOD1)
41