Cub Cadet RT 65 Operator's Manual page 14

Off-Season Storage
If the tiller will not be used for a period longer than 30 days, the
following steps should be taken to prepare the tiller for storage.
• Clean the exterior of the engine and the entire tiller
thoroughly. Lubricate the tiller as described in the
lubrication instructions.
• We do not recommend the use of pressure washers to
clean your tiller. They may cause damage to electric
components, spindles, pulleys, bearings or the engine. The
use of pressure washers will result in shortened life and
reduce serviceability.
• Refer to the Engine Operator's Manual for correct engine
storage instructions.
• Wipe the tines with an oiled rag to prevent rust.
• Store tiller in a clean, dry area. Do not store next to
corrosive materials, such as fertilizer.
NOTE: When storing any type of power equipment in an
unventilated area or metal storage shed, care should be taken
to rustproof the equipment. Using a light oil or silicone, coat the
equipment and especially any springs, bearings, and cables.
14 s 6— M
ectiOn aintenance
& a
djustMents