Assembling Cleaner; Carton Contents; Connect Hose, Wand, Nozzle - Royal Lexon S18 Owner's Manual

1. VACUUM ASSEMBLY

CARTON CONTENTS

1.1
A. Canister Cleaner
B. Telescoping Extension Wand
C. Hose Handle Assembly
A
D. Power Nozzle
E. Crevice Tool
F. Dusting Brush
G. Hard Floor Brush
Remove all parts from carton
and identify each item shown.
Make sure all parts are located
before disposing of packing
materials.
CONNECT HOSE, WAND AND NOZZLE
Connect Hose
WARNING
! !
Always turn off this appliance before
connecting hose.
1.2 Push Hose Connector end (A) into opening (B)
on front of cleaner. To disconnect hose from
cleaner, press release buttons (C) on sides of Hose
Connector and pull out.
To disconnect hose from the cleaner, press the
button (D) on the hose connector and pull straight
out.
WARNING
!
!
The hose contains electrical wires. Avoid picking
up sharp objects. If hose appears damaged, cut,
punctured, or wires are exposed, unplug unit and
discontinue use.
Connect Telescoping Extension Wand
1.3 Push Hand Grip (E) firmly into end of Wand (F)
until Latch clicks. Push button (G) on wand to utilize
telescopic feature. To remove Wand from Hose,
press on Wand Releases Button on end of Wand
and pull apart.
D
B
E
G
C
1.2
B
A
D
C
1.3
1.4
H
E
F
G
Connect Nozzle
WARNING
!
!
Always turn off appliance before connecting
Power Nozzle.
1.4 Push the opposite end of Wand firmly into
Power Nozzle.
To remove, press on Wand Release Button (H) and
pull wand out to disconnect from nozzle.
Actual model may vary from images shown.
5
F