Transmitting - Uniden Voyager Owner's Manual

To stop scanning, press the SCAN button once more. SCAN and

TRIPLE disappear from the display.
•
Scanning starts from the lowest to highest channel and stops
when it finds an active channel. It remains on that channel until
the transmission ends, then resumes scanning after a 3 second
delay period.
•
When in the scan mode, the unit automatically activates the
Triple Watch feature. To deactivate Triple Watch from the
scanning mode, press the TRI button.
TRIPLE disappears from the display.

Transmitting

Transmission power can be set to either

5W or 1W.
Press the 1/5W button to make
the change, then the 5W or the 1W
indicator on the display changes
accordingly.
TX Power will be set to 5W when is changed to 16CH. The TX
Power is able to change to 1 W at 16CH by pressing /5W.
To transmit, press and hold the PTT key.

TX appears on the display.
To return to receive, release the PTT key.

TX disappears from the display.
•
If the PTT key is pressed for more than 5 minutes, TX starts
blinking and the transmission ends. The TX time out tone will
sound until the PTT key is released.
•
If the battery indicator drops to the 1-mark level on the display,
when the PTT key is pressed, the radio will not transmit and the
TX icon starts blinking. (Refer to the description of the Battery
Indicator on the next page.)
Operation