iHome IP28 User Manual page 11

Symptom
iPhone/iPod didn't
Operating iP28 on batteries. The iP28 only
charge
charges iPhone/iPod while operating on AC
power
iPhone or iPod is not docked properly
iPhone/iPod is locked up/ frozen
iPhone/iPod battery has problem
Volume level is set too high
Sound is distorted
Sound source is distorted
Batteries are weak
Troubleshooting
Possible Problem
Make sure the iP28 is plugged into a working AC outlet to
charge your iPhone or iPod
Remove your iPhone or iPod from the dock and check for
obstruction on the connectors in the dock and on your
iPhone or iPod. Then replace it in the dock.
Please make sure your iPhone or iPod is working properly
before docking into the unit. It may need a reset. Please
refer to your iPhone or iPod manual for details.
Decrease the volume
If the original sound source (MP3) is of poor quality,
distortion and noise are easily noticed with high-power
speakers. Try a different audio source such as a music CD.
If you are using an external sound source like older
generation of iPod, try reducing the output volume on the
device itself.
Try turning off EXB on the unit or the bass boost OFF on
your iPod/sound source.
Replace current batteries with new ones
10
Solution