Inserting A Pause In The Dialing Sequence; Edit Records; Delete Records; Dialing A Number From Internal Memory - RCA 2111 User Manual

Inserting a Pause in the Dialing Sequence (of a Stored Number)
Press the #pause/ringer button on the handset's touch-tone pad to insert
a delay in dialing sequence when a pause is needed to wait for a dial tone
(for example, after you dial 9 for an outside line, or to wait for a computer
access tone.) Each pause counts as one digit in the dialing sequence.

Edit Records

From Phonebook Sub-Menu:
Use the caller ID-volume ( or ) button to scroll to EDIT RECORDS.
1.
2. Press the mute/menu OK button to confirm, the screen displays the
records.
Use the caller ID-volume ( or ) button or key in alphabet to move
3.
to desired record, press mute/menu OK button to confirm. The screen
displays ENTER NAME.
4. Repeat Steps 3 through 7 in "Add Records" section.

Delete Records

From Phonebook Sub-Menu:
Use the caller ID-volume ( or ) button to scroll to DELETE
1.
RECORDS.
2. Press the mute/menu OK button to confirm, the screen displays the
records.
Use the caller ID-volume ( or ) button or key in alphabet to move
3.
to desired record, press the delete/int/conf button. The screen displays
DELETE?.
4. Press the delete/int/conf button again to confirm.
NOTE: If you don't want to change or delete a record,
simply press the END button, or wait for one minute to exit
automatically.

Dialing a Number from Internal Memory

1. Make sure the phone is OFF (not in TALK mode).
2. Press the mute/menu OK button to access the phonebook sub-menu.
Use the caller ID-volume ( or ) button to scroll to VIEW RECORDS.
3.
4. Press the mute/menu OK button to confirm
Use the caller ID-volume ( or ) button or key in alphabet to move
5.
to the desired number.
6. Press the TALK/SPEAKER buttons, the number dials automatically.
32