Olympus E-620 Instruction Manual page 123

Viewfinder
Monitor indication
indications
m
No indication
Internal camera
temperature is too
high. Please wait for
cooling before
camera use.
CARD-COVER
OPEN
No indication
BATTERY EMPTY
No indication
NO CONNECTION
No indication
NO PAPER
No indication
NO INK
No indication
JAMMED
SETTINGS
No indication
CHANGED
No indication
PRINT ERROR
No indication
CANNOT PRINT
Possible cause
Extended use of live view or
sequential shooting has
increased the internal
temperature of the camera.
The card cover is open.
The battery is drained.
The camera is not
connected to the computer
or printer correctly.
There is no paper in the
printer.
The printer has run out of
ink.
The paper is jammed.
The printer's paper cassette
has been removed or the
printer has been
manipulated while making
settings on the camera.
There is a problem with the
printer and/or camera.
Pictures recorded on other
cameras may not be printed
on this camera.
Corrective action
Turn off the camera and wait for
the internal temperature to cool.
Wait a moment for the camera to
turn off automatically. Allow the
internal temperature of the
camera to cool before resuming
operations.
Close the card cover.
Charge the battery.
Disconnect the camera and
connect it again correctly.
Load some paper in the printer.
Replace the ink cartridge in the
printer.
Remove the jammed paper.
Do not manipulate the printer
while making settings on the
camera.
Turn off camera and printer.
Check the printer and remedy
any problems before turning the
power on again.
Use a personal computer to
print.
11
123
EN