Inserting Or Removing A Cd - Fujitsu FPC-M80000 User Manual

Inserting or removing a CD

Inserting a CD-ROM
1 Press the Eject button.
This ejects the tray to mount a CD.
Busy lamp
2 With the label side of the CD facing upward, put the CD in the center of the tray.
Tray
3 Press the Eject button.
The tray enters the unit to load the CD.
Point
- The Busy lamp lights up when the CD is loaded. Proceed to the following operation after mak-
ing sure that the Busy lamp turns off.
Removing the CD
Confirm that the Busy lamp is off, then press the Eject button to remove the CD.
Eject
button
Label side
23