I Inserting or removing a CD
G Inserting a CD
1
Press the Eject button.
Pressing the center of the eject button opens the CD tray.
Eject button
Busy lamp
2
Place a CD with the label side up in the center of the tray.
Label side
3
Press the eject button.
The tray slides into the drive to load the CD.
Point
The busy lamp lights up when a CD is loaded. Wait until the lamp goes off, then proceed to the
next operation.
G Removing the CD
Confirm that the busy lamp is off, then press the eject button to remove the CD.
26
Tray