Pontiac G5 2009 Getting To Know Manual page 12

Hide thumbs Also See for G5 2009:
Table of Contents

Advertisement

Getting to Know Your G5
12
Setting the Time
To set the time:
1. Turn on the radio.
2. Press the
(Clock) button. Or,
if equipped, press the MENU button
until the clock option is displayed;
and then press the pushbutton
located under the clock option label.
The HR, MIN, MM, DD, YYYY labels
will appear on the display.
3. Press the pushbutton under any of
the labels to be changed.
4. Press the pushbutton again or the
FWD button to increase the numbers.
Press the REV button to decrease
the numbers. Rotating the
knob also will increase or decrease
the numbers of the selected label.
5. Press the Clock or MENU button
again to set the currently displayed
time and date.
Portable Audio Player
A portable audio player (iPod
MP3 player or other portable-type
player) can be connected to the auxiliary
input jack located on the radio. When
connected, the audio system automati-
cally begins playing audio from the
portable player over the vehicle
speakers. To optimize volume, fully
increase the volume on your portable
player.
Using the USB Port (if equipped)
The USB port is located on the front of
the radio. A connected USB storage
device or an iPod
using the radio buttons and knobs. The
iPod music will appear on the radio dis-
play and begin playing automatically.
MP3 Capability
A CD-R or CD-RW containing MP3
audio files will play automatically when
inserted into the CD player. An MP3
label will be displayed.
Note: CDs with any affixed labels may
jam in the CD player. Label a CD using
a permanent marker. If more than one
(Tune)
CD is inserted into the slot at a time,
or if scratched or damaged CDs are
played, the CD player could be dam-
aged. When using the CD player, use
only CDs in good condition without
labels; load one CD at a time; and keep
the CD player and the loading slot free
of foreign materials, liquids or debris.
, Palm
,
®
®
Radio Data System
When you tune to a Radio Data System
(RDS) station, the station name and call
letters will appear on the display instead
of the frequency. RDS stations may also
provide the time of day, a program type
for current programming and the name
of the program being broadcast.
RDS features are available for use only
on FM stations that broadcast RDS
information. RDS relies on receiving
specific information from these stations
and will work only when the information
is available.
See Section 3 of your Owner Manual.
can be controlled
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents