Suspension - Baja motorsports Phoenix 250 Owner's Manual

Suspension

The front and rear suspension systems consists of springs and hy-
draulic damping devices. The rear suspension system has a spring
pre-load which adjusts the force needed to begin compression of the
spring. Traction and comfort are acquired by the oil damper system.
It hydraulically controls the compression and rebound of the sus-
pension.
Whenever you change the load on your motorcycle (add passenger
or cargo), or when riding conditions change, be sure to adjust the
rear suspension pre-load.
If you set the spring pre-load to a lower setting would accomplish a
softer ride. This setting should be used with a light load and smooth
roads. For a more firm ride set the spring pre-load to a higher set-
ting, used for heavy loads, rough roads and a more challenging ride.
Rear Suspension Adjustment
Adjustment to the spring pre-load on the rear suspension should be
done for the weight of a rider and passenger (if any) and different
riding conditions.
The adjustments in this manual are limited. Do not disassemble or
service the dampers, have your local service center perform these
tasks.
45