Pre-Ride Inspection - Baja motorsports Phoenix 250 Owner's Manual

Pre-Ride Inspection

Before each ride check the condition of your motorcycle to make
sure that it does not have mechanical problems. Your motorcycle
should always be in good riding condition to ensure the safety of
you, your passenger (if any) and others around you.
WARNING
!
Improper maintenance of this motorcycle or failure to
correct any problems can result in serious injury or
death. ALWAYS perform a pre-ride inspection before
every ride.
Be sure to check the following items before each ride:
BRAKES - Press on the brake pedal and hold in brake lever to ensure
that the brakes are operating correctly.
THROTTLE - Rotate the throttle handle to ensure it moves smoothly.
LEAKS and LOOSE ENDS - Check all hoses for leaks and cables that
may be loose.
LIGHTS - Be sure that your headlight, tail light, brake light and turn
signals are working properly.
CHAIN - Check the condition. Adjust the slack (if any) and lubricate
(if needed).
TIRES - Use an air pressure gauge to check the pressure. If needed
add air. Look for excessive wear or damage.
If you are riding with a passenger or carrying cargo check:
LOAD LIMIT - Do not exceed the load limit.
CARGO - Secure all cargo.
REAR SUSPENSION - Adjust the suspension according to the weight
of the load you are carrying.
Make certain that you keep with the Periodic maintenance (see peri-
odic maintenance section).
17