Starting Procedures; Starting And Stopping Engine - Baja motorsports Phoenix 250 Owner's Manual

Starting and Stopping the Engine
Always follow proper starting procedures.
WARNING
!
Never start the engine in a closed place as the exhausted
gas from the vehicle contains toxic carbon monoxide.
Starting procedure
● Insert key into ignition, turn to "ON" position.
● Make sure the transmission is in the "NEUTRAL" position.
● Turn the engine stop switch to "RUN".
● Turn fuel valve to "ON".
If you are restarting a warm engine, follow procedure for High Air
Temperature.
Normal Air Temperature : 10º -35ºC (50º -95ºF)
1) Open choke lever
2) Start the engine, leaving throttle closed. Do not open throttle while
choke is open, this will make it difficult to start.
3) After engine has started, close choke lever. If idle is not stable,
open the throttle a little.
Open
Choke lever
ON
19
Closed
OFF