Additional Wds Options; Lazy Wds; Wds Site Survey - TRENDnet TEW-815DAP User Manual

TEW-815DAP
TRENDnet User's Guide

Additional WDS Options

The TEW-815DAP access point provides 2 methods to simplify the entering the remote
wireless MAC addresses when configuring WDS mode.

Lazy WDS

Wireless > Basic > WDS
This option simplifies the configuration of MAC address in WDS by only requiring one
side of a WDS bridge to add remote wireless MAC addresses. For example, if the
wireless MAC address of AP2 has been added to AP1, the wireless MAC address of AP1
does not need to be added to AP2. On AP2, you would need to simply enable (check)
Lazy WDS to establish the bridge connection. This option is only available when using
Wireless Bridge with Access Point.

WDS Site Survey

Wireless > Basic > Wireless Network Settings - (2.4GHz or 5GHz) > WDS
This option allows you to scan for your remote WDS supported devices broadcasting
(WDS+AP mode), then select and connect to copy the wireless MAC addresses of your
other WDS supported device. This simplifies the process of having to write down the
wireless MAC addresses of all other WDS supported devices. This option is most useful
when using Wireless Bridge with Access Point.
© Copyright 2014 TRENDnet. All Rights Reserved.
27