Electrolux EOEM61CS User Manual page 14

E:line built in ovens
Hide thumbs Also See for EOEM61CS:
Table of Contents

Advertisement

26 electrolux e:line ovens oven door removal
Cleaning door glass panels
warning
Do not to use harsh abrasives on the glass panes as the
reflective surface plays a role in the function of the oven.
Do not place glass in dishwasher. Hand wash only with a
soft cloth and warm soapy water. When dry polish with a
soft cloth and ensure the glass is dry before reassembly.
Bottom trim (on selected models)
• T he bottom trim may be removed for cleaning by
snapping out and lifting away from the glass.
Re-assembling bottom trim
• P ush down to "snap" each side of bottom trim back into
door columns.
Re-assembling door glass panels
• I nsert the smaller clear glass panel (when fitted) first
from above and at an angle to the profile of the door.
• R epeat for the black bordered glass panel ensuring the
painted surface is facing to the downside.
Re-assembling top door trim
• T ake hold of the top door trim at each side and position
it to the inside edge of the glass.
• P ush the trim down with its top edge over glass panel
until the clip snaps in on each side of the trim.
• P ush the middle of the trim down to ensure it is straight
and firm against the glass panel.
Fitting the oven door
• T ake hold of the oven door with a hand on each side
and with the door at an angle of 45º, position the
recesses at the bottom of the door onto the hinge arms
of the oven. Let the door slide down the hinge arms as
far as it will go.
oven door removal electrolux e:line ovens 27
• O pen the door fully to access the hinges then rotate
the 'stirrups' (highlighted in the image) on both hinges
back to their original positions. The oven door may now
be closed.

Advertisement

Table of Contents
loading

Table of Contents