Dirt Devil Vacuum Cleaner Owner's Manual page 8

WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING.
Your cleaner is eouiooed with a shut off valve within vour Dirtv Water Tank. Emotv the Dirtv Water Tank
.
- - -
. . . .
when the wet andlo;
dry
debris reaches the "Debris
ax
Fill" h e on the outside df the cleanl~irty Water
Tank or the float rises, shutting off air flow through the nozzle.
NOTE: You will hear a noticeable change in the pitch of the cleaner, This indicates a need to empty the
Dirty Water Tank.
Tank-In-Tank'": Your cleaner is designed with a unique Tank-In-Tank'" system. The outer tank
(Clean Water Tank) contains the cleaning solution and water mix while the inner tank
(Dirty Water Tank) collects dry and wet debris.
EMPTY DIRTY WATER TANK
G
Disconnect cleaner from Push down on GleanlDirty
iraso tab (Diaaram 3) and oull uo to remove filter
electrical outlet (Diagram Water Tank latch while assembly (bia&m 3a) out of tank. Empty contents
1). Place cleaner handle in grabbing handle and into sink (Diagram 3b).
upright and locked posi- pulling tank up and out
tion (Diagram la). from main body of cleaner.
Return filter assembly back into CleanIDirty Water Tank
(Diagram 1). To ensure a proper fit, make sure arrow on filter
assembly is aligned with Clean Water Tank Cap (Diagram la.)
Replace CleanlDirty Water
Tank into main body of
cleaner and snap CleanlDirty
Water Tank latch into place.