How To Shave With An Electric Razor - Philips Norelco SensoTouch 1190X User Manual

ENGLISH
20
◗ If you are still not convinced after 21 days,
Philips Norelco will refund you the full
purchase price as long as the request is
received within 45 days of purchase.

How To Shave With An Electric Razor

C
◗ This symbol on the razor indicates that the
razor can be used in the bath or shower.
◗ Make sure the charging stand/Jet Clean
System does not get wet or near water.
◗ Use this razor for its intended household use
as described in this manual.
Shaving
C
Turn razor ON by pressing the on/off
1
button once. Shave against the direction
of beard growth using only circular
movements.
The razor display will light up briefly (Models
1190X, 1180X, 1180XCC).
Stretch your skin with your free hand so
2
blades can lift and cut whiskers. Gently
press razor to skin so the floating heads
can follow the contours of your face.
DO NOT press too hard. Too much
pressure can pinch the skin into the combs.
Turn razor OFF by pressing the on/off
3
button once.
The display lights up for a few seconds and then
shows the remaining battery capacity (Models
1190X, 1180X. 1180XCC).
Clean the razor after each use (see
4
chapter 'Cleaning').
C
5 Put the Protective Cap on the razor to
protect razor heads.
Wet Shaving
You can also use the razor on a wet face with
shaving foam.
1 Apply some water to your skin.
Apply shaving foam to your skin.
2
Rinse the shaving unit under the tap
3
to ensure that the shaving unit glides
smoothly over your skin.
Press the on/off button once to switch on
4
the razor.
Move the shaving heads in circular
5
movements over your skin.
NOTE: Rinse the razor under the tap regularly to
ensure that it continues to glide smoothly over
your skin.
ENGLISH
21