Operations - Honeywell IP Receiver User Manual

Honeywell

4 Operations

Refer to the following table for the operations of the front panel screen:
Prompt
24
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Description
Power up and turn on the switch on the rear panel
of IP Receiver (No.12 in
front panel are lit in turn and the screen displays
"Starting...".
When the system starts up normally, the screen
displays the module name, date and time.
Press ► or ENTER to enter the menu, as shown in
the left figure.
Press ▲ and ▼ to go through menu items;
Press ► or ENTER to select the menu item;
Press ◄ to return to idle-mode display.
Search alarm
In Figure 3, select "Search Alarm" and the left figure
is displayed.
There are three options for searching alarms: "All
Alarms", "Reported Alarm" and "Unreported Alarm".
Unreported Alarm: If IP Receiver is not connected
with CMS, all the alarms are stored in the database
of IP Receiver as unreported alarms.
Press ► or ENTER to select the menu item;
Press ◄ or select "Return" to go to the previous
menu.
View mode
In Figure 4, select an option for searching alarms
and the left figure is displayed.
There are three view modes for each alarm type:
"Last Alarm", "First Alarm" and "Search by Time".
Press ► or ENTER to select the menu item;
Press ◄ or select "Return" to go to the previous
menu.
Figure 2-2). LEDs on the