Code Restriction, Dial Block; Account Code Entry - NEC Univerge DT310 User Manual

CODE RESTRICTION, DIAL BLOCK

To set Dial Block:
1. Press the Speaker key.
2.
Dial 700 (default).
3.
Dial the 4-digit Dial Block Code (user defined).
4. Dial 1.
The confirmation tone is heard.
Note:
5. Press the Speaker key to hang up.
To release Dial Block:
1.
Press the Speaker key.
2. Dial 700.
3.
Dial the 4-Digit Block Code.
4.
Dial 0.
Note: The confirmation tone is heard.
5.
Press the Speaker key to hang up.
Note: At default, Dial Block restriction Class per
Extension is denied.

ACCOUNT CODE ENTRY

To enter an Account Code any time while on a trunk
call:
The outside caller cannot hear the Account Code digits
you enter. You can use this procedure if your system
has Optional Account Codes enabled. You may also be
able to use this procedure for incoming calls.
1. Dial *.
-OR-
Press your Account Code key
(Service Code 851:Code 50).
2.
Dial your Account Code (1~16 digits, using 0~9 and
*).
LINE 001
Enter Account Code
Conf
If Account Codes are hidden, each digit you
Note:
dial shows as a "*" character on the
telephone's display.
3. Dial *.
-OR-
Press your Account Code key
(Service Code 851:Code 50).
43
Rpt Sav