Station Relocation - NEC Univerge DT310 User Manual

3. Use VOL UP or VOL DOWN keys to scroll through
the messages.
4.
For messages 1~8 and 10, enter digits to append
the message, if needed.
Note: You can append messages 1~8 and 10 with
digits (e.g. the time when you get back). You
enter the time in 24-hour format.
No. Message
1 IN MEETING UNTIL ##:##
2 MEETING ROOM - #######
3 COME BACK ##:##
4 PLEASE CALL ###########
5 BUSY CALL AFTER ##:##
6 OUT FOR LUNCH BACK ##:##
7 BUSINESS TRIP BACK ##:##
8 BUSINESS TRIP ##########
9 GONE FOR THE DAY
10 ON VACATION UNTIL ##:##
11~20 MESSAGE 11~20
5. Press Speaker to hang up.
Intercom calls to extensions with Selectable
Note:
Display Messaging set will receive a DND
signal and receive the display message on
their telephone's display instead of ringing the
display.
Change "#" to:
Time (when meeting is
done)
Room name or
extension
Time (when returning)
11 digits (Tel. No.)
Time (when returning)
Time (when returning)
Date (when returning)
10 digits (where
reached)
Date (when returning)
42
To allow calls to ring through and have the
Note:
message displayed on the calling extension's
display, cancel DND by pressing DND + 0.
To cancel a message:
1.
Press the Speaker key.
2. Press the Text Message key
(Service Code 851:18+).
3.
Press Speaker to hang up.
2-14 THU

STATION RELOCATION

To exchange two terminals:
1. Pick up the handset or press the Speaker key.
2.
Dial the Extension Data Swap Service Code – not
assigned at default.
3.
Dial the Extension Data Swap Password – not
assigned at default.
4. Dial the extension to be swapped with or relocated
to.
5. When successfully completed, a confirmation tone
will be heard and the display will show "completed".
6.
Press the Speaker key twice.
4:20PM
CANCEL