Placing Calls - NEC Univerge DT310 User Manual

Voice Announce Calls
1. Ensure the MIC LED is lit.
2.
Adjust the Speaker volume as needed.
3. Respond hands free.
The handset may be used any time
Note:
during the conversation.
Camp-on (Call Waiting)
Receive the camp-on tone while on another call:
1.
Replace the handset to disconnect the present call.
-OR-
Press the Hold key and press the hook switch to
converse with the second party.
Off Hook Signaling
With a call in progress:
1.
Receive Off Hook signaling.
2. Press the Answer key, then converse with the
second party.
2-11 MON 10:56AM
TALKING TO
CONF
Note 1: The second call may be placed on Hold.
STA 12345
Press the flashing Line key or Conf key to
Note 2:
return to the first call.

PLACING CALLS

Internal Calls
1. Lift the handset.
2.
Dial a station number or 0 (for attendant).
-OR-
Press the Hold key and press the hook switch to
converse with the second party.
3. Voice announce after the tone burst, or wait for the
ringing call to be answered.
Outside Calls
1. Lift the handset.
2.
Dial the trunk access code (e.g. 9).
-OR-
Press an idle Programmable Outside Line key.
3. Dial the telephone number.
4.
Converse.
Line 001
Conf
25
00:15
2142622000
Rpt Save Trf