Miele DA 5190 W Operating And Installation Instructions page 31

a 3 protective shields
to prevent scratches to the chimney
during installation.
b 1 vent collar
for use with 6" (150 mm) exhaust
ducting
c 1 reducing collar
for use with 5" (125 mm) exhaust
ducting.
d Telescopic retaining plate secures
the chimney extension.
e Installation kit for recirculation
mode; contains diverter, hose and
hose clips
(optional accessory)
1 lever for dismantling the chimney
Installation instruction diagram
,
CAUTION
To avoid risk of hand or other injury,
avoid contact with sharp edges
during the assembly and installation
process.
6 large headed screws 5 x 40 mm
for securing the retaining plates and the
canopy
(S8 wall anchors included in the
packaging are not for use in USA)
1 small headed screw 5 x 40 mm,
1 cap
for securing the canopy
2 M 6 locking nuts
for securing the unit
2 screws 3.9 x 7.5 mm
for securing the chimney
Installation
31