Miele DA 5100 D Installation Instructions Manual
Hide thumbs
Also See for DA 5100 D:
- Operating and installation instructions (40 pages) ,
- Installation instructions (1 page) ,
- Operating and installation instructions (36 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Miele DA 5100 D
Summary of Contents for Miele DA 5100 D
-
Page 1: Installation Instructions
Installation Instructions DA 5100 D en-CA Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions. -
Page 2: To Reduce The Risk Of Fire, Electric Shock, Or Injury To Persons, Observe The Following
This appliance is not designed for maritime use or for use in mobile installations such as recreational vehicles or aircraft. However, under certain conditions installation in these applications may be possible. Please contact your Miele dealer or the Miele Technical Service Department with specific requirements. - Page 3 IMPORTANT SAFETY INSTRUCTIONS d) Before connecting the appliance to the power supply make sure that the ,WARNING voltage and frequency listed on the data plate correspond with the TO REDUCE THE RISK OF A household electrical supply. COOKTOP GREASE FIRE: This data must correspond to prevent appliance damage.
- Page 4 IMPORTANT SAFETY INSTRUCTIONS ,WARNING Do not allow children to play with or operate the appliance or its controls. TO REDUCE THE RISK OF Supervise its use by the elderly or INJURY TO PERSONS IN THE infirm. EVENT OF A COOKTOP Always turn on the hood when using GREASE FIRE, OBSERVE THE the cooktop to prevent damage from...
- Page 5 IMPORTANT SAFETY INSTRUCTIONS Installation g) Do not install this hood over cooktops that burn solid fuel. ,WARNING h) Provided a larger distance is not TO REDUCE THE RISK OF given by the manufacturer of the FIRE, ELECTRIC SHOCK, OR cooktop, follow the minimum safety distances between a cooktop and the INJURY TO PERSONS, bottom of the hood given in the...
-
Page 6: Appliance Dimensions
Appliance dimensions Exhaust connection 6" (150 mm) diameter 1) Opening for ductwork and power cord... - Page 7 Do not install this exhaust hood over cooktops burning solid fuel. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood: Miele Cooktops Non-Miele Cooktops Electric Cooktops 24"...
-
Page 8: Structural Support
Structural support The ceiling mounting plate will CAUTION support the weight of the hood. This When cutting or drilling into the wall ceiling plate must be attached to or ceiling, do not damage electrical rigid structural framing that is wiring and other hidden utilities. supported in its entirety by the ceiling joists, or to the ceiling joists directly. -
Page 9: Protective Film
Installation Protective film Installation accessories The casing is covered with a protective film to prevent scratching during transport. ^ Peel off the film before installing the 4 Screws 8 x 60 mm with 4 Washers casing parts. for securing the ceiling plate. (S8 wall anchors included in the packaging are not for use in USA) CAUTION... -
Page 10: Air Extraction
Air extraction Exhaust ducting and connections WARNING Use smooth or flexible pipwork made from approved non-flammable Danger of toxic fumes. materials for exhaust ducting. Gas cooking appliances release To achieve the most efficient air extraction and quietest noise levels, carbon monoxide that can be consider the following: harmful or fatal if inhaled. -
Page 11: Condensate Trap
Air extraction Condensate trap optional accessory In some cases, a condensate trap may be required to collect and evaporate any condensation which may develop. This optional accessory is available for ducts 5" (125 mm) and 6" (150 mm) in diameter. –... -
Page 12: Electrical Connection
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or contact Miele’s Technical Service Department. 1-800-999-1360 1-800-565-6435 WARNING: THIS APPLIANCE MUST BE... -
Page 13: Technical Data
Technical data Maximum load ....430 W Fan..... . . 350 W Lighting . - Page 14 Alteration rights reserved / 0610 M.-Nr. 07 838 060 / 00 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.