Connect Cable - Serial; Connect A Tethered Scanner - Honeywell Thor VM2 User Manual

Vehicle mount computer microsoft windows embedded standard operating systems

Hide thumbs Also See for Thor VM2:

Table of Contents

Connect Cable - Serial

Note:

Pin 9 of the desired COM port must be configured to provide +5V or RI as needed for the connected device. See the

Thor VM2 Reference Guide for details.

1. Seat the cable end connector firmly over the serial COM port on the Quick Mount Smart Dock.

2. Turn the thumbscrews in a clockwise direction. Do not over tighten.

3. Use a strain relief clamp to secure the cable to the Thor VM2.

4. Connect the other cable end to the desired serial device.

1. The scanner cable is attached to either the COM1 or COM2 port on the Quick Mount Smart Dock.

2. Connect the serial cable for the scanner as directed above.

3. When the Thor VM2 is powered on, it provides power to the serial scanner.

3-3

Table of Contents