Connect Cable - Usb Host - Honeywell Thor VM2 User Manual
Vehicle mount computer microsoft windows embedded standard operating systems
Hide thumbs
Also See for Thor VM2:
- User manual (398 pages) ,
- Reference manual (196 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Connect Cable - USB Host
Note:
A USB Client connection is not used on Thor VM2 with a Windows Embedded Standard operating system.
1. Seat the cable end connector (connector 1) firmly over the USB Cable Connector on the Quick Mount Smart Dock.
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
3. Connector 3 on the cable provides a USB-Host connection. Connector 2 (USB-Client) is not used for the USB-H
connection.
3-2
1. D9 Connector
2. USB Client Connector (not
used)
3. USB Host Connector (for
connecting to a USB device)
Advertisement
Table of Contents
