Changing A Number (After Exchanging/Moving/Relocating A Phone); Fax Details And Message On Answering Machine - Siemens HiPath 500 User Manual

Step by Step
)9419
(9419
Changing a number (after exchanging/
moving/relocating a phone)
When configured (consult your service personnel), you
can move your number to any other phone.
Your phone to date is then assigned the old number of
your new phone; the number including phone settings
(e.g. programmed keys) are exchanged.
Prerequisite: Your old and new telephone are the first
telephones at each connection. The telephones are in
idle state.
The following procedure is carried out on the new
phone.
The phone is in idle mode
Enter the code.
j
Enter own station number.
j
Enter code (telephone lock)
(Not necessary if you have not set a code.)
Enter the code.
You can however connect your phone to a differ-
ent port and then carry out the procedure.
Fax details and message on answering
machine
If there is a fax machine or answering machine connect-
ed to your system and the "Fax service" key is pro-
grammed on your phone, this key lights up when a fax
or message is received.
Deactivating signaling
R
Press the flashing key "Fax service". The LED goes out.
More functions/services
page 13.
page 49.
53