Table of Contents
Advertisement
rapid resume logic
The Rapid Resume Logic feature ensures that when the security system is powered back up after power has been
disconnected, the system will resume the same state it was in before power was lost. For example, if power is
disconnected during a full trigger sequence, the system will still be in the full trigger sequence when power is
reconnected to the unit. If power is disconnected while the unit is disarmed, it will still be disarmed when power
is restored.
rear defogger control
The rear defogger output can be remotely turned on/off any time using the remote control. The default setting
is ON.
To turn the rear defogger output OFF:
1. Press & release the
2. The parking lights will flash 2-times.
3. The rear defogger output will no longer activate when the vehicle is remote started.
NOTE: If the remote start is On the lights will turn off then flash 2-times before returning to their
normal output and the defogger output, if active, will cease.
To turn the rear defogger output ON:
1. Press & release the
2. The parking lights will flash 3-times.
3. The rear defogger output will once again activate when the vehicle is remote started.
NOTE: If the remote start is On the lights will turn off then flash 3-times before returning to their
normal output and the defogger output will activate as programmed.
42
and
and
buttons of the remote control.
and
and
buttons of the remote control.
© 2006 Directed Electronics—all rights reserved
Advertisement
Table of Contents
