Enhancement Settings; Headset - Nokia 6235 User Manual

Assign a voice tag to a
command
Before using voice commands, you
must first add a voice tag to the
device function.
1. In the standby mode, select
Menu > Settings
commands.
2. Select the device function you
wish to tag: Profiles,
mailbox, Radio, Infrared,
recorder or Call
3. If necessary, select
chosen option associated with
that function.
4. Select Start, and speak the voice
tag clearly into the microphone.
Do not select Quit
want to cancel the recording
The device replays and saves the
recorded tag. The
next to commands that have voice
tags assigned.
Activate a voice command
After you have associated a voice
tag with a function in your device,
you can issue a command by
speaking the voice tag.
1. In the standby mode, press and
hold the Right selection key.
2. When Speak now
pronounce the voice tag clearly
into the microphone.
> Voice
Voice
Voice
register.
Add for the
unless you
icon appears
displays,
Select Playback to listen to the voice
command tag.
When the device finds the voice tag,
Found: displays, and the device plays
the recognised voice tag through the
earpiece. The function you requested
is activated.
Options
After you have associated a voice
tag to a command, you can select
one of the following options:
Change — Change the voice command.
Delete — Erase the voice command tag.

■ Enhancement settings

The enhancement settings menu is
shown only if the device has been
connected to a compatible
enhancement. In the standby mode,
select Menu > Settings
settings > Headset, Handsfree,
Loopset, Text phone

Headset

Important: The headset may
affect your ability to hear
sounds around you. Do not
use the headset in situations
that may endanger your
safety.
Select the option of your choice to
enter the submenu and modify its
settings.
S e t t i n g s
> Enhancement
or Charger.
55