Omega ECHO-3 Operation And Installation Manual page 8

The Echo will playa musical melody; this is the Start Melody which
plays upon remote starting. One of five melodies may be chosen now.
Press and release the button
Each press of the button changes to the next melody, note that the
LCD screen displays "S" and a numeral, which is the melody number.
When the desired musical tone has been the last one played
press and release the
0
button
The Echo will play another musical melody; this is the Stop Melody which plays when remote start
engine run period ends. There are five different melody choices which can be made.
Press and release the • button
Each press of the button changes to the next melody, note that the LCD
screen displays a numeral only, which is the melody number.
When the desired musical tone has been the last one played, you may
leave the Echo undisturbed for 12 seconds, until it chirps once
OR
press & release the
0
button to scroll back through the programmable features.
• While the Echo programming must be "scrolled" through, programming mode can be exited at
any point within the menu by simply not pressing any buttons for 12 seconds. The Echo chirps
once when it exits programming mode.
Page - 8
The Echo will playa musical melody; this is the Start Melody which
plays upon remote starting. One of five melodies may be chosen now.
Press and release the button
Each press of the button changes to the next melody, note that the
LCD screen displays "S" and a numeral, which is the melody number.
When the desired musical tone has been the last one played
press and release the
0
button
The Echo will play another musical melody; this is the Stop Melody which plays when remote start
engine run period ends. There are five different melody choices which can be made.
Press and release the • button
Each press of the button changes to the next melody, note that the LCD
screen displays a numeral only, which is the melody number.
When the desired musical tone has been the last one played, you may
leave the Echo undisturbed for 12 seconds, until it chirps once
OR
press & release the
0
button to scroll back through the programmable features.
• While the Echo programming must be "scrolled" through, programming mode can be exited at
any point within the menu by simply not pressing any buttons for 12 seconds. The Echo chirps
once when it exits programming mode.
Page - 8