D Talkgroup Id Code Selection; D Tx Status Message Selection - Icom IF5061 Instruction Manual

D Talkgroup ID code selection

(Digital mode operation only)
If the transceiver has [Talkgroup] assigned to it, the indication
can be toggled between the operating channel name (and the
channel number)* and the Talkgroup ID name (or ID code if
the ID name is not programmed.) When the Talkgroup ID
name (or ID code) is displayed, [CH Up] or [CH Down] selects
the desired Talkgroup ID name (or ID code).
q Push [Talkgroup]— Talkgroup ID name (or ID code)
appears.
Talkgroup ID name
T G I D 0 1
When the 2 lines indication mode is selected
and [Talkgroup] is assigned to [P0].
w Push [CH Up] or [CH Down] to select the desired
Talkgroup ID name (or ID code).
e Push [PTT] to transmit the selected Talkgroup ID.

D TX Status message selection

(Digital mode operation only)
If the transceiver has [TX Status] assigned to it, the indication
can be toggled between the operating channel name (and the
channel number)* and the Status message (and the Status
channel.)* When the Status message (and the Status chan-
nel)* is displayed, [CH Up] or [CH Down] selects the desired
Status message.
q Push [TX Status]— Status message (and Status channel)*
appears.
Appears above the
key that [Talkgroup]
T X
is assinged after
pushed.
When the 2 lines indication mode is selected.
w Push [CH Up] or [CH Down] to select the desired Status
message.
e Push [PTT] to transmit the selected Status message.
* Only when the 2 lines indication mode is selected.
BASIC OPERATION
Status channel Status message
S T A T U S 0 1
S t a t u s 0 1
2
2
12