Kenwood KDC-X700DAB Instruction Manual page 20

TROUBLESHOOTING
Symptom Remedy
"NA DEVICE" appears. Connect a supported USB device, and check the connections.
"NO MUSIC" appears. Connect a USB device that contains playable audio files.
"iPod ERROR" appears. • Reconnect the iPod.
• Reset the iPod.
Noise is generated. Skip to another track or change the disc.
Tracks do not play back as Playback order is determined when files are recorded.
you intended them to play.
"READING" keeps flashing. Do not use too many hierarchical levels or folders.
Elapsed playing time is not This is caused by how the tracks are recorded.
correct.
Correct characters are not This unit can only display uppercase letters, numbers, and a
displayed (e.g. album name). limited number of symbols.
"ADD ERROR" New station creation is unsuccessful.
"SEARCH ERROR"
"CHECK DEVICE" Check the Pandora application on your device.
"NO SKIPS" The skip limit has been reached.
"NO STATIONS" No stations are found.
"STATION LIMIT" The number of registered stations has reached its limit. Retry
after deleting unnecessary stations from your device.
"UPGRADE APP" Make sure you have installed the latest version of the
Pandora application on your device.
"CONNECT ERROR" Communication is unstable.
"RATING ERROR" Registration of thumbs up/thumbs down has failed.
"LICENSE ERROR" You try to access from a country which Pandora is not
deliverable.
20
Symptom Remedy
No Bluetooth device is • Search from the Bluetooth device again.
detected. • Reset the unit. ( 3)
Pairing cannot be • Make sure you have entered the same PIN code to both the
made. unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. ( 12)
"DEVICE FULL" appears. The number of registered devices has reached its limit.
Retry after deleting an unnecessary device. ( 15,
DEVICE DELETE)
Echo or noise occurs. • Adjust the microphone unit's position. ( 12)
• Check the [ECHO CANCEL] setting. ( 13)
Phone sound quality • Reduce the distance between the unit and the Bluetooth
is poor. device.
• Move the car to a place where you can get a better signal
reception.
• Voice calling method • Use voice calling method in a more quiet environment.
is not successful. • Reduce the distance from the microphone when you speak
• "N/A VOICE TAG" the name.
appears. • Make sure the same voice as the registered voice tag is
used.
"NOT SUPPORT" The connected phone does not support Voice Recognition
appears. feature.
• "NO ENTRY" appears. There is no registered device connected/found via
• "NO PAIR" appears. Bluetooth.
"ERROR" appears. Try the operation again. If "ERROR" appears again, check if
the device supports the function you have tried.
"NO INFO" appears. Bluetooth device cannot get the contact information.