Changing The Home Monitor Settings Of This Unit - Panasonic HC-X920 Operating Instructions Manual

≥ When automatic recording is performed with non-moving object detection, the set time will
be reset and non-moving object detection will start again.

Changing the home monitor settings of this unit

Setting cannot be performed while operating monitoring with a smartphone.
Touch [Setup] and select desired setting.
∫ [Home Monitor Connect]
You can display the registration screen for a Device ID and Password.
∫ [Remote Voice Level]
You can set the initial remote voice level and speaker volume level of the remote voice function.
(Volume low)/
≥ The mode cannot be switched to another one during home monitoring operations.
≥ Although home monitoring can be performed with the battery, we recommend you use the AC
adaptor.
≥ It is recommended to use this unit fixed so that it will not move since it may cause false detection.
≥ Power of this unit will automatically turn off when monitoring condition continues for
approximately 10 days.
≥ [REC MODE] is set to [HE].
≥ [ZOOM MODE] is set to [Opt.Zoom 12k].
≥ If you close the LCD monitor face down while recording, the LCD monitor of this unit will not
display.
≥ The password for the home monitor settings will change when [Reset Wi-Fi Settings] is
performed. Set the home monitor settings of the smartphone again and reconnect to this unit
when [Reset Wi-Fi Settings] is performed.
(Volume high)
- 154 -